Overview
This document provides information about the responsibilities gasfitters and buyers have for the purchase and installation of second-hand commercial catering equipment.
Second-hand appliances, the age and condition of which can vary enormously, can be purchased at lower cost than new, which is an obvious attraction when setting up a business, and these appliances are often obtained at auction, online, or from dealers.
Some second-hand commercial catering equipment have been found to be unsafe and many appliances do not meet minimum safety requirements.
Sale of gas appliances
It is an offence under the Gas Safety Act 1997 to sell or offer to sell an unsafe appliance. Appliances being sold for installation must be safe and comply with accepted standards (Certified).
Installation requirements
AS/NZS 5601.1 Gas Installations requires all type A appliances to be certified or be acceptable to the safety regulator (Energy Safe Victoria), and before a second-hand appliance is installed, the appliance must satisfy the regulator’s safety requirements.
Certification
Second-hand commercial catering appliances should show a certification number indicating that when it was new it complied with the required standard and was approved by an accepted gas certification body. If you are uncertain about whether your appliance has certification, refer to the National Database for gas appliances
Failure to show proof of certification will result in gas supply being withheld.
A second-hand appliance without an approval number may never have been submitted for testing. Where it cannot be established that an appliance has been certified, or the second hand appliance has been imported, certification must be obtained through an accepted gas certification body or alternatively be accepted by Energy Safe prior to installation.
Date: 21/12/2024 12:17
The material in this print-out was accurate at the time of printing.
Reviewed